Two Sofucor LED replacements, one critical difference
If your Sofucor ceiling fan's light has failed, you're choosing between two genuine replacement modules: the 18W 3CCT Non-Dimmable LED Light Source and the Legacy Single Color (1C LED) Replacement Light Source. They look similar and cost about the same, but they are not interchangeable. The right pick depends entirely on which light source your fan was originally built for.
This comparison breaks down compatibility, color temperature options, dimming behavior, and other practical differences so you can order once and get back to a working light.
Compatibility: which fans each module fits
The 18W 3CCT module is designed for compatible Sofucor ceiling fans that use a 3CCT light source. The supplied record lists these compatible models: 52K131, 42K009, 52K076, 52K077, 48K006 (non-dimmable version), 52K096 (non-dimmable version), and more. Because some fan models come in both dimmable and non-dimmable versions, verify your original light source specifications before ordering.
The Legacy 1C LED module is specifically for older Sofucor fans that originally used a single-color LED light source. Listed compatible models include 5247, 52144, 52K012, and other older models equipped with a single-color LED. Sofucor explicitly states this module is not compatible with newer 3CCT LED models. If you're unsure which light source your fan requires, contact Sofucor Customer Support before placing your order.
Key specs and features at a glance
- Sofucor 18W 3CCT Non-Dimmable Replacement LED Light Source: 18W LED light source with 3 selectable color temperatures (Warm White / Neutral White / Cool White), 120 mm dual-light LED board, input 100–240V, 50/60Hz, non-dimmable, built-in memory function. Three color temperatures let you match the fan light to your room's ambiance, and the memory function recalls your last setting. Non-dimmable means it works only with on/off switches, not dimmers.

Sofucor 18W 3CCT Non-Dimmable Replacement LED Light Source - Sofucor Legacy Single Color (1C LED) Replacement Light Source: Legacy single-color (1C LED) replacement light source, designed for older Sofucor ceiling fan models that use a single-color LED light source. Direct replacement for the original LED light source. This is the correct choice if your fan originally had a single-color LED. It restores the original lighting without color temperature options.

Sofucor Legacy Single Color (1C LED) Replacement Light Source
18W 3CCT vs Legacy 1C LED: side-by-side
The table below summarizes the practical differences based on the supplied product records.
- Color temperature: 18W 3CCT: three selectable temperatures (Warm White / Neutral White / Cool White). Legacy 1C LED: single color only, as originally equipped.
- Dimming: 18W 3CCT: non-dimmable. Legacy 1C LED: dimming capability not confirmed by the supplied information.
- Memory function: 18W 3CCT: built-in memory function. Legacy 1C LED: not mentioned in the supplied record.
- Compatible models (examples): 18W 3CCT: 52K131, 42K009, 52K076, 52K077, 48K006 (non-dimmable version), 52K096 (non-dimmable version), and more. Legacy 1C LED: 5247, 52144, 52K012, and other older models with single-color LED.
- Wattage: 18W 3CCT: 18W. Legacy 1C LED: wattage not specified in the supplied record.
What the 18W 3CCT module adds for daily use
The 3CCT module's main advantage is flexibility. Warm White suits relaxed evenings, Neutral White works for everyday tasks, and Cool White brightens utility spaces. The built-in memory function means the fan returns to your last chosen color temperature when you turn it back on, so you don't have to cycle through settings each time.
Keep in mind that this module is non-dimmable. If your fan is on a dimmer switch, this light source is not designed for that setup. Also, the 18W rating and 120 mm dual-light LED board are specific to this module; do not assume they apply to the Legacy unit.
When the Legacy 1C LED is the only safe choice
If your Sofucor fan is an older model that originally used a single-color LED, the Legacy 1C LED is the direct replacement. The 18W 3CCT module is not listed as compatible with those older fans, and Sofucor warns that the Legacy module is not compatible with newer 3CCT models. Using the wrong one may not fit or function correctly.
The Legacy module restores stable, energy-efficient LED performance without color temperature selection. If you were happy with the original single-color light, this is the straightforward fix. For dimming or wattage details, the supplied record does not confirm those specifications, so check with Sofucor support if those features matter to you.
How to confirm which module your fan needs
Before ordering, verify your fan's original light source. These steps help you avoid a return.
- Check your fan's model number: Look for a label on the fan motor housing or in the manual. Compare it to the compatible model lists above.
- Inspect the old light source: If you still have the failed module, look for markings indicating 3CCT or single-color. A 3CCT module typically has multiple color temperature settings; a single-color module does not.
- Note dimmable vs non-dimmable: Some Sofucor fan models come in both dimmable and non-dimmable versions. The 18W 3CCT module is non-dimmable, so confirm your fan's version.
- Contact Sofucor support if unsure: Sofucor recommends contacting customer support before purchasing if you are unsure which light source your ceiling fan requires.
Package contents and replacement notes
- Sofucor 18W 3CCT Non-Dimmable Replacement LED Light Source: Package includes 1 × 18W 3CCT Non-Dimmable LED Light Source. Easy to replace. You get the LED module only; no extra hardware is listed. Replacement is described as easy, but follow your fan's instructions.
- Sofucor Legacy Single Color (1C LED) Replacement Light Source: Package includes 1 × Legacy 1C LED Replacement Light Source. Easy installation. The module is a direct replacement for the original single-color LED, with easy installation noted.



